MARDON BS15 EXTRACTION UNIT

Machine Width
683 mm
Machine Depth
673 mm
Machine Height
861 mm
Filter Area 1.4 m²
Capacity of Dust Tray 18 litres
Inlet sizes (left and/or right side)
1 x 100 mm & 1 x 80 mm diameter ports
or 2 x 80 mm diameter ports
or 1 x 120 mm port on one side only
Gross Weight 74 kg
Motor Power Rating 0.75 kW (1 hp) 230/1/50 or 400/3/50
Full Load Amps 1 Phase = 5.1A, 3 Phase = 1.8A
Starter Optional
ATEX Explosion Relief Panel Optional: A certified explosion vent relief panel is available to order if required
to meet local authority or HSE requirements.
BS15 EXTRACTOR
APPLICATION
The BS15 Extractor is designed specifically for use with band
saws. The BS15 will connect directly to the standard bottom
extraction port on a band saw and is also designed to connect
to the Mardon universal band saw top extraction kit. Top
extraction is recommended by the HSE and does work well
with removing the fine dust which would normally be able to
enter the operator’s breathing zone.
It is low level and will sit below the working bed height of most
band saws.
The versatility of this little extractor also means that it can be
used with other applications such as connecting to small duct
manifolds, for use with multiple fret saws or small sanders.
FEATURES
• Compact and easy to install
• Low noise levels
• Solid industrial construction
• Good collection capacity
• Filter will work well with a mix of waste
produced by different saws and materials
• Range of band saw connection kits available to
purchase with this extractor.